Three Effective Skills of Stone Color Difference Treatment

Writer： admin Time：2006-06-30 09:19 Browse：℃

At present, the treatment of stone color are mainly dyeing, polish, credit and other treatment methods. As the color difference processing will change the natural color and texture of stone, such as marble coloring treatment is a relatively high technical content, and requires a certain time and patience, and granite due to the higher absorption rate, the color is more difficult to control. Therefore, when doing chromatic aberration treatment works, the need for careful construction, must be based on specific circumstances to do pre-test and judge the scientific. Here we briefly introduce the stone color difference processing of three effective skills.
1, treatment methods to determine
For color judgments, there is an interesting test method: the color of the two plates on the water, to be completely absorbed stone after the observation, if the two stone in the water color becomes close to or the same, then this In this case, just use the grazing care agent to brush the lighter color of the stone.
If the two plates in clear water is still significant color, you can stone coloring technology to change the emergence of a part of the color stone, so as to achieve the overall effect.
2, credit the correct use of care agent
Many people respond in the use of color when the care of the color, there will be color white, or soon after the effect disappears. In fact, the brightening agent in the organic silicon components, fully absorbed in the stone, you can ensure that the color of stone in 15 years will not happen too much change, then what is the reason for the above-mentioned phenomenon?
This is due to improper construction methods. Silicone composition of the grading care agent in use, the need to go through several attempts to brush the credit agent, not overnight, but after brushing finished, stone color changes and decide whether to continue to brush, the general Said that in each brush to wait for the full penetration of the agent into the case, more than 2 times, you can maintain long-term use of results.
3, the use of coloring technology
In general, the smooth color of the stone can be used coloring technology, such as black, white and other colors than the pure marble, such as grain structure more obvious granite, you can also use coloring technology. While the color of the more complex surface of the stone surface with caution coloring technology. Because in practical applications, stone coloring without a lot of testing and argumentation, it is prone to more serious consequences, more difficult to deal with them.