Gap maintenance after stone decoration

Writer： admin Time：2013-08-16 21:16 Browse：℃

In the long-term use process, due to the neglect of maintenance, the external matter easily causes the gap to be polluted, resulting in blackening of the middle seam, which greatly affects the use and decoration effect.
Specific construction process:
1. Remove the original filler between the gaps, and use the cutting machine to install the 0.3mm cutting piece to re-cut the original gap to minimize the width between the gaps.
2. Coloring the special marble glue, using the crystal color of the marble glue, will improve the overall sense and achieve the most ideal visual effect.
3. Filling is carried out, and the marble glue is slightly higher than the horizontal plane. After the marble glue is completely cured, there will be a certain degree of shrinkage. This operation can avoid the phenomenon that the gap is still lower than the horizontal plane after the repair.
4. The grinding and polishing process is used to make the filler become a horizontal plane, which increases the overall sense and solves the problem of high and low gaps between the gaps, completely eliminating the phenomenon of blackening of the gap again.
The characteristics of marble glue caulking are convenient and fast curing, but the surface of the gap will not be shiny. If the overall surface effect is required to be high, such as seamless processing, it is recommended to use epoxy resin or unsaturated resin for caulking treatment.