Bathroom marble bathtub construction technology
Writer： admin Time：2019-03-12 09:09 Browse：℃
Marble bathtub craft
The taste and grade of the bathroom are greatly improved because of the stone. In addition to walls, floors and countertops, the combination of bathtub and marble makes bathers intoxicated. Under normal circumstances, common marble bathtubs are divided into three processes.
1 The construction process of pressing the stone at the connecting part of the stone according to the edge of the bathtub
Process flow: setting out → welding installation of angle iron base frame → steel mesh installation → cement sand paddle painting → stone installation → bathtub installation
Process standard description:
(1). The joint of the bathtub and the stone shall be constructed according to the method of pressing the stone on the edge of the bathtub. The stone countertop shall be cut and hollowed out according to the size of the bathtub according to the size of the bathtub and installed on site after the completion of the factory processing. The joint between the stone and the bathtub shall be closed with weather-resistant glue.
(2). Make 4*4 galvanized angle steel support frame for the stone parts around the bathtub, install the stone after painting with steel wire mesh cement sand paddle, and leave a hidden stone maintenance door. The specifications and direction of the maintenance door must meet the maintenance requirements.
More cases:
2 The connecting part of the bathtub and the stone is according to the construction technology of the stone pressing the bathtub
Process flow: setting out → welding installation of angle iron base frame → steel mesh installation → cement sand paddle painting → bathtub installation → stone installation → plate seam treatment
Process standard description:
(1). The joint between the bathtub and the stone shall be constructed according to the method of pressing the stone on the bathtub. The stone countertop shall be cut and hollowed out according to the size of the bathtub according to the size of the bathtub and installed on site after the completion of the factory processing. The joint between the stone and the bathtub shall be closed with weather resistant glue.
(2). Make 4*4 galvanized angle steel support frame for the stone parts around the bathtub, install the stone after painting with steel wire mesh cement sand paddle, and leave a hidden stone maintenance door. The specifications and direction of the maintenance door must meet the maintenance requirements.
More cases:
3 The connection part of the bathtub and the stone shall be flattened by the bathtub and the stone.
Process flow: setting out → brick wall masonry → cement sand paddle painting → bathtub installation → stone installation → plate seam treatment
Process standard description:
(1). The joint between the bathtub and the stone shall be constructed according to the method of making the bathtub and the stone flat, and the joint between the stone and the bathtub shall be closed with weather-resistant glue 2mm.
(2). A hidden stone maintenance door is left on the side, and the specification and direction of the maintenance door must meet the maintenance requirements
(3). When the stone countertop is a whole piece of stone, the hollow and edging must be cut according to the size of the bathtub when processing in the factory, and the actual transportation conditions on site and the protection of the finished product during transportation must be considered