Talking about the stone mosaic and three laying methods

Stone mosaics are widely used, hotels and home improvement can come in handy. Stone mosaic mainly includes marble mosaic, granite mosaic, jade mosaic, travertine mosaic, special-shaped mosaic, artistic waistline mosaic and other products.

 

The production of stone mosaic mosaics is mainly the processing of stone mosaic blocks. The raw materials for the mosaics mainly come from the leftover material left by the large slab stone processing factory in the cutting board cutting, preferably the leftover material from the thin board cutting below 1cm, stone The more varieties and colors, the better.

 

　　Mosaic mosaics mostly use matt or rough surfaces, and some stones with polished surfaces. The size is generally 2-3cm square. You can choose a larger surface size according to your needs. For small batch production or production of unit price mosaic stone mosaic products, you can use a small desktop cutting machine with a diamond saw blade to cut mosaic mosaics, or use a small hydraulic cutting machine with upper and lower cutting abrasives to process mosaic blocks, stone processing Granite mosaic tiles can only be cut one by one; if you want to mass produce regular-shaped marble mosaic tiles, it is feasible to use a bridge-type bridge cutting machine. You can stack several plates and fix them with special fixtures. , It can cut several parquet pieces at a time, and the processing efficiency is high.

 

　　The mosaic tiles on the polished surface can be cut directly from the scraps of the light board. However, matte or matte parquet blocks need to be matted. First, cut the corners of discarded boards with a thickness of 1-2 cm and different colors into squares, rectangles, triangles, rhombuses, or other regular parquet blocks that can be used as the basic shape of parquet, and put them into the drum. When the drum rotates, the plates rub against each other, and finally form a matte parquet with regular shape, rounded corners, matt surface and uniform abrasion.

 

　　 There are three methods for laying stone mosaic patterns. One is the method of adhering and splicing patterns on the whole board, which is also called direct assembly method. In addition, there are two ways to lay the stone mosaic pattern on the rough surface. One is the backing method, which is similar to glass mosaic. First, paste the assembled pattern on the kraft paper net, and use the concrete to directly glue it to the installation surface. After curing, remove the paper net; the other is the bracket method, you can make some ABS plastic brackets according to the design pattern in advance, each piece of rough stone corresponds to a bracket, and the bracket is fixed on the mounting surface with screws , And then glue the stone to the bracket with an adhesive, which can also form various beautiful and antique stone mosaic effects, and the construction is very convenient. The backing method is easy to install. Because the parquet pattern is pre-designed when the stone factory produces, the composition of the picture is single and rigid, which loses artistic creativity, but it is very suitable for the factory's standardized and mass production mode. Although the bracket method is complicated to install, it can be made by the installer according to the pre-designed patterns and shapes, leaving a lot of room for the installer to use his imagination.